January 9, 2005 HOME

Before the flap actuator assembly can be installed in the fuselage, the baggage compartment floors need to be permanently attached.  I decided to run 2 pieces of conduit through compartment under the floor panels for future

I riveted the floors in place and installed the nutplates along the tunnel to hold the tunnel cover in place.

Not wanting to work on any one thing too long, I took a break from the flap actuator to get back to finishing up the brake peddles.  Well, I knew I wouldn't get them finished, but I did make some more progress.

   

A little back rivet work attaching the peddle supports.

You can see Bill was in the shop again, because I get to be in the pictures.  Hmmm, why does he seem so good at taking pictures on bad hair days?

 

Previous Day | HOME | Next Day