October 30, 2010

Today I reinstalled the nose wheel and got it properly adjusted.  It still needs to be tensioned, so that goes on the list of things to do.

I finished much of the rough sanding on the wheel pants and installed them for a final check of alignment.

With the wheel pants installed, I got a rough idea of how the intersection fairings will look.

Here's a better look at the first intersection fairing just out of the mold.  I'll bond it to the wheel pant and fill it all in so it looks nice and smooth (I hope).

It felt like an unproductive day, but mostly it was only tedious.  I have to remember, it all counts toward the end....

Previous Day | HOME | Next Day